N
TruthVerse News

How do I check my clashes on Navisworks Freedom?

Author

Ava White

Updated on March 19, 2026

How do I check my clashes on Navisworks Freedom?

To summarise, the workflow is as follows:
  1. Run Navisworks Manage to run a clash test.
  2. Report clash results as Viewpoints.
  3. Publish the model to an NWD file.
  4. Open the NWD file with Navisworks Simulate.
  5. Select the clash viewpoints in turn.
  6. Use Switchback to locate the clashing items in the authoring CAD application.

Consequently, how do I check my clashes on navisworks?

To Run an Individual Clash Test

  1. If the Clash Detective window is not already open, click Home tab Tools panel Clash Detective .
  2. Click the Tests panel expand button and select the test you want to run.
  3. Click the Select tab and set the required test options.

Similarly, can you measure in Navisworks Freedom? Measure Tools: Measure tools enable you to measure between points on items in the model. All measurements are made in display units. The measure tools are available from Review tab Measure panel.

Accordingly, how do I find coordinates on Navisworks Freedom?

Autodesk Navisworks

In the Review ribbon, click on the arrow in the bottom right of the Measure pane to bring up the Measure Tools window (alternatively you can activate the Measure Tools window using the View ribbon). Then click on the Point to Point measure tool and click once on to snap to a corner/edge.

How do I save my view in Navisworks Freedom?

If you want your saved viewpoints to display all the elements that you required / hide when you created them, then go to Options>Viewpoint Defaults and check the box for “Save Hide/Required Attributes.”

What is navisworks used for?

Used primarily in construction industries to complement 3D design packages (such as Autodesk Revit, AutoCAD, and MicroStation), Navisworks allows users to open and combine 3D models; navigate around them in real-time (without the WASD possibility); and review the model using a set of tools including comments, redlining

What is quantification in Navisworks?

In Autodesk Navisworks, takeoff is carried out using the Quantification feature. Quantification helps you automatically make material estimates, measure areas and count building components. The Quantification feature is available for Autodesk Navisworks Manage and Autodesk Navisworks Simulate users.

Does Navisworks Simulate have clash detection?

Re: Navisworks Simulate for viewing, not detecting, clashes? Correct, the whole clash detection module is missing in Simulate. While you can save clash viewpoints and reference those in Freedom and Simulate, the clashing elements won't be highlighted like they are in Manage.

How do you use clash detection in Navisworks Manage?

Click on Add-Ins tab > External Tools > Navisworks SwitchBack to enable it. In Navisworks Manage, Clash Detective window, on the Results tab, click the SwitchBack button. Revit will load the relevant project, find and select the item, and zoom to it.

How do you make a clash report on navisworks?

To Create a Clash Report
  1. In the Clash Detective window, run the desired test.
  2. Click the Report tab.
  3. In the Contents area select the check boxes for the data you want to appear in the report for each clash result.
  4. In the For Clash Groups Include drop-down list, select how to display the clash groups in your report.

How do I search for equipment on navisworks?

Open the Find Items window. On the Find Selection Tree, click the items where you want to start searching from. For example, if you want to search the whole model, select the Standard option from the drop-down list, press and hold CTRL, and click all files that comprise the model.

How do you find the coordinates?

Get the coordinates of a place
  1. On your Android phone or tablet, open the Google Maps app .
  2. Touch and hold an area of the map that isn't labeled. You'll see a red pin appear.
  3. You'll see the coordinates in the search box at the top.

How do you change coordinates on navisworks?

Solution:
  1. From the Home ribbon tab click on File Options.
  2. From the File Options dialog box choose the Orientation tab.
  3. Adjust the Up and North directions: Up. X, Y, Z - Specify the X, Y, and Z coordinate values. By default, Autodesk Navisworks takes the positive Z-axis as Up.
  4. Click OK to apply and close the dialog box.

How do I find my coordinates in Autocad?

To Display the Coordinates of a Point
  1. Click Home tab Utilities panel ID Point. Find.
  2. Click the location that you want to identify. The X,Y,Z coordinate values are displayed at the Command prompt. With object snaps turned on, you can select an object and see the coordinates for a feature such as an endpoint, midpoint, or center.

How does Autocad determine elevation?

Solution:
  1. Select the Pop Out arrow on the Measure tab to access the Measure Tools window.
  2. Select the Measure command.
  3. Pick relevant points on an object for which the location is being requested. The information should display accordingly.

How does navisworks measure?

Help
  1. Click Review tab Measure panel Measure drop-down.
  2. Click a Measure tool.
  3. Press Y, or on the Measure panel, click Lock drop-down Y axis .
  4. Move your cursor over the model in the Scene View and use the surface snap to select a surface.
  5. Click the start point of the distance to be measured in the Scene View.

How does navisworks measure angles?

To calculate an angle between two lines
  1. Click Review tab Measure panel Measure drop-down Angle .
  2. Click a point on the first line.
  3. Click the first line at the point where it intersects the second line.
  4. Click a point on the second line. The optional dimension label displays the calculated angle between the two lines.

How does navisworks measure distance?

To Measure a total distance along a route
  1. Click Review tab Measure panel Measure drop-down Point Line .
  2. Click the start and the second point to be measured.
  3. Click the next point along the route.
  4. Repeat this to measure the entire route. The optional dimension label displays the total distance along the selected route.

How do you measure shortest distance in Navisworks?

To measure the shortest distance between two objects
  1. Press and hold the CTRL key, and select two objects in the Scene View with the Select tool .
  2. Click Review tab Measure panel Measure Shortest Distance . The scene view automatically zooms to the measured area. The optional dimension label displays the shortest distance between the selected objects.

How do I view Navisworks files?

You need following archives: Kernel, BimNv, Visualize and VisualizeQt. Unpack and extract them into the same folder, go to exevc15_amd64dll sub-folder and run OdVisualizeViewer, now you can open a Navisworks file.

How do I reduce the size of my Navisworks file?

Reduce Navisworks file size and convert to other file format using our plugins
  1. Open Navisworks Model.
  2. Goto Options -> Model -> NWD -> and choose options as below screenshot. Keep Precision number based on your requirement.
  3. Press OK.
  4. Save Navisworks file as NWD: eg: NWDModelV1.0.nwd.

How do I unhide in NavisWorks?

Click Home tab Visibility panel Unhide All drop-down Unhide All .

How do I turn on selection tree in NavisWorks?

Help
  1. Open the Selection Tree, and select Standard from the drop-down list.
  2. Click an object in the Selection tree to select the corresponding geometry in the Scene View.
  3. To select several items at the same time, use the SHIFT and CTRL keys.
  4. To remove selection from an object in the Selection Tree press ESC.

How do I hide in NavisWorks?

To Hide Selected Objects
  1. In the Scene View, select all items you want to hide.
  2. Click Home tab Visibility panel Hide . The selected objects are now invisible. Tip: Clicking Hide again displays the invisible objects.

How do I turn on quick properties in Navisworks?

Help
  1. Select an object in the Scene View or on the Selection Tree. Alternatively, click a Selection Set or a Search Set.
  2. Click Home tab Select & Search panel Selection Inspector .
  3. Click Quick Property Definitions.
  4. In the Options Editor dialog box, adjust the property definitions, then click OK.

How do I find coordinates in Navisworks Manage?

Re: Display of coordinates in Navisworks

You can turn on the coordinates display by going to Tools>Global Options>Interface>Display(not to be confused with Display Units), scrolling down to Heads Up and selecting Show Position check box. You can also turn on the display of a compass in the Mode drop down.

Related Documentation

How long does it take to close on a business loan?

What English words are stop words for Google?

What's the scientific name for flower?

How do I check my clashes on Navisworks Freedom?