N
TruthVerse News

How do I fix my surface touchpad?

Author

Christopher Duran

Updated on March 06, 2026

How do I fix my surface touchpad?

Here's how to change touchpad settings in PC settings:
  1. Make sure the cover is attached to your Surface.
  2. Swipe in from the right edge of the screen to bring up the Charms Menu and tap Settings.
  3. Tap Change PC settings.
  4. Tap or click PC and devices.
  5. Tap or click Mouse and touchpad.

In this regard, how do I enable the touchpad on my Surface Pro?

You can change touchpad settings to turn the touchpad on and off, reverse scrolling direction, turn gestures on and off, and more.

  1. Attach your Surface to its keyboard or Type Cover.
  2. Go to Start > Settings > Devices > Touchpad.
  3. Adjust your settings under Touchpad.

Beside above, how do I restore the touchpad on my laptop? On the Devices page, select the “Touchpad” category on the left. On the right, scroll down a bit and then click the “Reset” button under the “Reset Your Touchpad” section. If you've also got touchpad software from the manufacturer installed, you'll need to reset your touchpad settings there, too.

Accordingly, how do I fix my Surface Type Cover?

  1. Reinstall all keyboard drivers.
  2. Check if the Type Cover works in BIOS.
  3. Check the connector.
  4. Disconnect the Type Cover and leave it overnight.
  5. Install the firmware and remove the problematic drivers.
  6. Make sure that the Type Cover is enabled in UEFI.

Why is my touchpad not working?

Check your laptop's Touchpad settings to make sure the touchpad is enabled and check its other settings while you're at it. If that doesn't help, you may need a new driver. See if there's a driver you can download and install. If none of these suggestions work then you've got a hardware problem.

How do I disable the touchpad on my Surface Pro?

Disable Trackpad on Surface Pro 3
  1. Select the Settings charm.
  2. Select Change PC Settings.
  3. Select PC and devices.
  4. Select Mouse and touchpad.
  5. In the Touchpad selection, set the touchpad to Off, as the following figure shows.

How do I disable the touchpad on my Surface Pro 4?

Use the keyboard shortcut Windows-I to open the Settings application. Go to Devices > Touchpad. To disable the touchpad when you connect a mouse: uncheck "Leave touchpad on when a mouse is connected". If you want to disable the touchpad completely: toggle touchpad so that it reads off.

How do I enable right click on my touchpad?

Open the app and head to Device > Touchpad. Scroll down, and you should find settings for right-clicking on the touchpad and middle-clicking on the touchpad.

How do I fix my touchpad on Windows 10?

Fix touchpad problems in Windows 10
  1. On Start , search for Device Manager, and select it from the list of results.
  2. If those steps didn't work, try uninstalling your touchpad driver: open Device Manager, right-click (or press and hold) the touchpad driver, and select Uninstall.
  3. If that didn't work, try using the generic driver that comes with Windows.

How do I right click on Surface Pro tablet mode?

Obviously, the basics work as expected: You can tap (“soft-press”) or click the surface of the touchpad to initiate a mouse click, and can double-tap, or double-click, to perform a right-mouse click. (Clicking in the lower-right of the touchpad also performs a right-click.)

How do I right click on a surface pro without a mouse?

If you are trying to right click (display the shortcut menu) using the touchscreen, you should be able to press and hold your finger on screen until you see a small outline of a box appear around your finger when recognized. Release your finger and the menu should appear.

How do I factory reset a Microsoft Surface?

From within Windows 10
  1. Step 1: Pull up the Start menu and select or search for Settings.
  2. Step 2: In Settings, select Updates and Security, and then Recovery.
  3. Step 3: From here, there will be a few options:
  4. Step 4: Select Reset.
  5. Step 1: From the Sign In screen, hit the Power button on your Surface.

How do you do a hard reset on a Microsoft Surface?

Press and hold the volume-up button and the power button at the same time until the screen turns off (about 15 seconds), then release both. The screen may flash the Surface logo, but continue holding the buttons down for at least 15 seconds. After you release the buttons, wait 10 seconds.

Can Surface Pro 7 keyboard work detached?

The Surface Pro 7 is the latest entry in Microsoft's Surface Pro line of hybrid laptops. In and of itself, the Surface Pro 7 is a tablet with a kickstand, and an optional detachable keyboard turns it into a lightweight laptop (the Surface Pro 7 does not ship with a keyboard).

How do I get my keyboard to work on my surface?

To do so, follow these instructions:
  1. Make sure your keyboard cover is connected properly.
  2. Swipe in from the right side of the screen to bring up the charms menu.
  3. Tap on Settings.
  4. Tap on Power.
  5. Select Shut Down.
  6. Wait 60 seconds and press the power button at the top of your Surface to turn it back on.

Can Surface Pro keyboard work detached?

You can use it as a bat while detached.

How do I use function keys on Surface Pro?

Hold down the Fn key and press the Caps key to lock the function keys. Hold down the Fn key and press the Caps key again to unlock them. Press the Fn key to lock the function keys. Press the Fn key again to unlock them.

How do I change the tablet mode on Surface Pro?

Tablet mode makes Windows 10 more touch-friendly when using your device as a tablet. Select action center on the taskbar (next to the date and time), and then select Tablet mode to turn it on or off.

How do you charge a Surface Pro keyboard?

Here's how to charge your Slim Cover Keyboard:
  1. Plug the micro USB end of the included charging cable into the Slim.
  2. Plug the USB end of the included charging cable into any USB charging.
  3. The LED will light red and stay lit until your Slim Cover is fully charged.
  4. When the red LED goes off, your Slim Cover is fully charged.

What do you do when your keyboard stops working?

The simplest fix is to carefully turn the keyboard or laptop upside down and gently shake it. Usually, anything beneath the keys or inside the keyboard will shake out of the device, freeing up the keys for effective functioning once again.

How do I unfreeze my laptop touchpad?

Look for a touchpad icon (often F5, F7 or F9) and: Press this key. If this fails:* Press this key in unison with the “Fn” (function) key at the bottom of your laptop (often located between the “Ctrl” and “Alt” keys).

What to do if cursor is not moving?

Fix 2: Try the function keys
  1. On your keyboard, hold down the Fn key and press the touchpad key (or F7, F8, F9, F5, depending on the laptop brand you're using).
  2. Move your mouse and check if the mouse frozen on laptop issue has been fixed. If yes, then great! But if the problem persists, move on to Fix 3, below.

Can't find my touchpad settings?

How to Fix Synaptics TouchPad Settings Missing in Windows
  1. Restart Your Laptop. The first step to troubleshoot any issue is to restart the device.
  2. Update Driver from Device Manager. It's always a good idea to keep your PC and its driver updated to the latest version.
  3. Use Windows Update to Upgrade Driver.
  4. Roll Back Driver.
  5. Download Synaptics App.

Why touchpad is not working HP?

Make sure that the laptop touchpad has not accidentally been turned off or disabled. You might have disabled your touchpad on accident, in which case you will need to check to make sure and if needed, enable the HP touchpad again. The most common solution will be to double tap the top left corner of your touchpad.

Where is the touchpad driver in Device Manager?

To do so, search for Device Manager, open it, go to Mice and other pointing devices, and find your touchpad (mine is labeled HID-compliant mouse, but yours may be named something else). Right-click on your touchpad and click Update driver.

How do I reinstall my touchpad driver?

Reinstall Touchpad driver
  1. Open Device Manager.
  2. Uninstall the touchpad driver under Mice and other pointing devices.
  3. Restart the computer.
  4. Install the latest touchpad driver from Lenovo support website (see Navigate and download drivers from support site).
  5. Restart the computer.

Related Documentation

What information is no longer needed on a CV?

What science is astronomy?

Is electron front end or back-end?

How do I fix my surface touchpad?