N
TruthVerse News

How do I reset my Synology router?

Author

Ava White

Updated on March 14, 2026

How do I reset my Synology router?

Hard reset your Synology Router

Use a paper clip to gently press and hold the RESET button for ten seconds. Your Synology Router will start a hard reset.

In respect to this, how do I reset my Synology?

Use a paper clip to gently press and hold down the RESET button for around 4 seconds until you hear a beep sound, release the button immediately, and then press and hold down the button again for 4 seconds until you hear 3 more beeps.

Furthermore, how do I factory reset my Synology MR2200ac? When your Synology router MR2200ac is powered on, press and hold the reset button for 30 seconds. While still holding the reset button, turn off the power to the router and hold the reset button for another 30 seconds.

Also to know is, how do I soft reset my router?

To perform a soft reset, unplug the cable that connects the router to the modem, then reconnect it after a few seconds. Some routers may have a different way to perform a soft reset: Look for a Disconnect/Connect button on the console. This resets the connection between the modem and the service provider.

What is the difference of hard reset and reset in router configuration?

The two terms factory and hard reset are associated with settings. A factory reset relates to the rebooting of the entire system, while hard resets relates to the resetting of any hardware in the system. The factory reset makes the device function again in a new form. It cleans the entire system of the device.

What does Synology reset button do?

Each Synology Unified Controller comes with a RESET button. It allows you to reset the administrator login credentials and network settings to default settings if you have forgotten your password, want to move your Synology Unified Controller to another network environment, or need to assign a new IP address.

Can not connect to Synology?

If the Synology Assistant still cannot find your Synology NAS, you can do the following to fix the issues: Remove or disable the firewall or antivirus software on your computer temporarily. Set your computer IP as DHCP and try again. Use other computers to search your Synology NAS.

How do I reboot my NAS?

To Reboot the BlackArmor NAS:
  1. In the menu bar, select System, and then click Shut Down/Reboot.
  2. Click the Reboot button.
  3. Click the OK button to confirm your choice.
  4. A window opens notifying you that the system is ready to continue.
  5. Enter the administrator's Username and password.
  6. Click the Login button.

How do I do a factory reset?

  1. Open Settings, and select System.
  2. Select Reset options.
  3. Select Erase all data (factory reset).
  4. Select Reset Phone or Reset Tablet at the bottom.
  5. You'll be asked to confirm, select Erase Everything.
  6. Your device should reboot and may show a progress screen indicating that it is erasing the data.

How long does Synology take to reboot?

Boot takes probably a good 5 or 6 minutes and I can hear the HDD's working occasionally during that time, but they don't light up on the NAS. Eventually it'll beep and the HDD lights will come on.

What is the default IP address for Synology NAS?

By default it will only use DHCP. Use Synology Assistant to find the self assigned IP (169.254.

How do I access my Synology NAS remotely?

Overview
  1. Go to Control Panel > QuickConnect.
  2. Check the Enable QuickConnect box.
  3. If you do not have a Synology Account, click Log in to or register a Synology Account.
  4. Create your own QuickConnect ID in the QuickConnect ID field.
  5. If you do not see the QuickConnect DSM link, click Advanced and make sure DSM is enabled.

Should you reset your router?

“In general, it's a great idea to reboot the main Internet router every couple of months. It's also a good security practice to reboot the router every once in a while.” The benefits of regularly rebooting your router are twofold. If you want a faster connection, you should be regularly turning your router on and off.

What happens when you hard reset your router?

Router reset will wipe out all of your customized settings. Router username and password will be reset to factory default values as shown on the router label. Personalized Wi-Fi settings will be deleted, including the Wi-Fi name and password you created.

Does Resetting router clear history?

They cannot log actual browsing history as they simply do not have the storage to do that. Some other answers recommend resetting the router to the factory state. In some routers, including mine, resetting the router to the factory defaults does NOT clear the router's log files.

Does Resetting router change wifi password?

If you can't access the router's web-based setup page or forgot the router's password, you may reset the router to its default factory settings. To do this, press and hold the Reset button for 10 seconds. NOTE: Resetting your router to its default factory settings will also reset your router's password.

How do I reset my home wifi?

Instead, this is how to reboot your wireless router:
  1. Unplug your router or modem from its power outlet (don't just turn it off).
  2. Wait 15-20 seconds, then plug it back in.
  3. Allow the device a minute or two to turn back on.

Where is reset button on router?

The reset button is almost always on the back or underside of a router. The most universal way to reset a router, however, is via the reset button, usually found on the router's back or underside. This button is almost always recessed but you should be able to access it with a straightened-out paper clip.

Does resetting your router change your IP address?

The common nature of DHCP is to "remember" the device and assign you the same IP address you had before, so simply turning off your router and turning it back on will not likely change IP address. However, if you try multiple times you may get lucky and will obtain a new IP address from your ISP.

How do I restart my router from command prompt?

Type "ipconfig /release" and press Enter. Type "ipconfig /renew" and press Enter. Type "netsh winsock reset" and press Enter. Restart the computer.

How often should I reboot my wifi router?

“In general, it's a great idea to reboot the main Internet router every couple of months. A router reboot can fix certain Internet connectivity issues, from no Internet connectivity to slow wireless connections, and should be one of your first troubleshooting steps in a home or consumer environment.

How do I configure my Synology router?

From an Android device:

Launch DS router and tap Set up new router. Note: If you are already managing other Synology Router in this app, tap the + icon at the upper-right corner on the login page beforehand. Allow DS router to access your device's location in the dialog that appears.

How do I log into my Synology router?

  1. 1 Use a computer or wireless device connected to the Synology Router's local network.
  2. 2 Open a web browser, and enter either URL into the address bar:
  3. a http://router.synology.com.
  4. b
  5. 3 Once connected, click Start to launch the SRM Setup Wizard.

How do I setup my MR2200ac?

Press the power button to power on your MR2200ac. Wait for around two minutes until the STATUS LED indicator starts blinking blue. 2 Log in to Synology Router Manager (SRM) on the primary Wi-Fi point, and go to Wi-Fi Connect > Wi-Fi Point to add your MR2200ac to the Wi-Fi system.

How do I change my Synology router password?

You can reset the admin password using the RESET button on your Synology NAS/NVR/IP SAN (hereinafter "device").
  1. Locate the RESET button on your Synology device.
  2. Use a paper clip to gently press and hold down the RESET button for about four seconds until you hear a beep sound, and release the button immediately.

How do I reset computer to original settings?

Navigate to Settings > Update & Security > Recovery. You should see a title that says "Reset this PC." Click Get Started. You can either select Keep my files or Remove everything. The former resets your options to default and removes uninstalled apps, like browsers, but keeps your data intact.

Is hard reset safe?

Using the Hard Reset is safe and should not cause any damage. After using this feature, your device will have the software and set of applications as the moment they leave the factory.

Does reboot delete all files?

Rebooting is the same as restarting, and close enough to powering off and then turning off your device. The purpose is to close and reopen the operating system. Resetting, on the other hand, means taking the device back to the state in which it left the factory. Resetting wipes all your personal data.

What is the difference between hard reset and soft reset?

A hard reset is initiated from the hardware keys. (Volume, power, home, etc.) Whereas a soft reset is initiated from within the devices software. (Usually located in the Settings area of the device) Merely pressing the power button for 10 or so seconds to reboot the phone doesn't factory reset the device.

Can spyware survive a factory reset?

Reset your device.

If you are very concerned and want to ensure your phone is safe from spyware, back up your data (photos, contacts, etc.) and then use the”Factory Reset” function of the phone to clear all apps and settings. Spyware like this will not survive a reset.

What does a hard reset do?

A factory data reset erases your data from the phone. While data stored in your Google Account can be restored, all apps and their data will be uninstalled. To be ready to restore your data, make sure that it's in your Google Account.

What are the disadvantages of factory reset?

Disadvantages of FRP (Factory Reset Protection) Lock
  • You may end up in losing your data.
  • It's technically a breach of Android settings.
  • It may be risky.
  • Data stored on external storage can't be erased.
  • All your information will be deleted and you can't restore it back unless you've taken its backup.

How do you do a hard reset on a tablet?

  1. Ensure the device is powered off.
  2. Press and hold the Volume Up and Power buttons.
  3. Continue to hold Volume Up and Power buttons until the Android Recovery screen appears (about 10-15 seconds) then release both buttons.
  4. From the Android Recovery screen, select Wipe data/factory reset.
  5. Select Yes.

What is difference between reboot and restart?

Some operating systems "reboot" by an ACPI command, which "restarts" the computer. Restart is vague, and can mean the same as reboot, or a reload of the current operating system (without the boot loader), or even just restarting the user mode part of the operating system, leaving the kernel mode memory intact.

Related Documentation

Does mannitol need to be filtered?

What is Ishak score?

Does laparoscopy affect ovarian reserve?

How do I reset my Synology router?