- Switch(config)#ip routing. Enable IP routing on the router.
- Switch(config)#no switchport. Create the SVI interface or navigate to configuration mode for the interface.
- Switch(config-if)#ip address n.n.n.n subnet-mask. Assign an IP address to the SVI for the VLAN.
Also know, what is routed port on a switch?
Routed ports are used for point-to-point links. Connecting WAN routers and security devices are examples of the use of routed ports. In a switched network, routed ports are mostly configured between switches in the core and distribution layer.
Secondly, how do I assign a VLAN to a switch port? Assigning Access Ports to VLANs
- Choose Switch configuration.
- Choose VLAN Menu…
- Choose VLAN Port Assignment.
- Choose Edit.
- Find the port to assign.
- Press space on Default VLAN until it shows No.
- Move over to the column for the VLAN to which this port will be assigned.
- Press space until it shows Untagged.
Beside above, how do I configure a port on a switch?
To configure the switch so that you can connect an appropriate device to a port and have it work, follow these steps:
- Connect to your switch and get into Configuration mode using a set of commands like the following:
- Choose the interface by number.
- Specify the interface number.
What is difference between a routed port and Switchport on a Layer 3 switch?
There are two types of Layer 3 ports that can be configured on a switch depending on what you need to do, an SVI is for Inter-VLAN communication on a switch without the need for a router, and a Routed Port functions entirely at Layer 3 (no L2 services). Routed Port = Re-configuring a Physical interface.
