N
TruthVerse News

What is the first step in lock out/tag out?

Author

David Richardson

Updated on February 25, 2026

What is the first step in lock out/tag out?

Lockout Tagout Procedure in 8 Simple Steps
  1. Find the procedure to be used.
  2. Notify anyone affected by the lockout tagout.
  3. Locate all listed energy sources.
  4. Shut down the machine or equipment.
  5. Lockout and tag all energy isolating devices.
  6. Release any stored energy (steam, hydraulic, etc.).
  7. Operate controls to test disconnects.
  8. Return controls to off position.

Subsequently, one may also ask, what are the 6 steps of lock out/tag out?

Let's look at each of these steps of LOTO safety more closely in the sections below.

  1. Lockout/Tagout Step 1: Preparation.
  2. Lockout/Tagout Step 2: Shut Down.
  3. Lockout/Tagout Step 3: Isolation.
  4. Lockout/Tagout Step 4: Lockout/Tagout.
  5. Lockout/Tagout Step 5: Stored Energy Check.
  6. Lockout/Tagout Step 6: Isolation Verification.

Beside above, what are the 7 steps to lockout tagout? Page 1

  1. Think, Plan, and Check.
  2. • If you are in charge, think through the entire procedure.
  3. Communicate.
  4. • Notify all those who need to know that a lockout tagout procedure is taking place.
  5. Neutralize all appropriate power at the source.
  6. • Disconnect electricity.
  7. Lock out all power sources.
  8. •

Just so, what are the main steps to do lockout tag out?

Steps of a lockout/tag out program include:

  1. Prepare for shutdown.
  2. Notify all affected employees.
  3. Equipment Shutdown.
  4. Isolation of system from hazardous energy.
  5. Dissipation (removal) of residual or stored energy.
  6. Lockout/Tag out.
  7. Verify Isolation.
  8. Perform Maintenance or Service Activity.

What are the five steps to remove lock out/tag out?

5 Simple Steps to release / removal of Lockout and Tagout:

  1. Remove Tools and Replace Guards:
  2. Check for Employees:
  3. Notify the Affected Employees:
  4. Remove Lockout Tagout Devices:
  5. Restore Energy:

What is the OSHA standard for lockout tagout?

The OSHA standard for The Control of Hazardous Energy (Lockout/Tagout), Title 29 Code of Federal Regulations (CFR) Part 1910.147, addresses the practices and procedures necessary to disable machinery or equipment, thereby preventing the release of hazardous energy while employees perform servicing and maintenance

What is Loto process?

According to OSHA, lockout/tagout (LOTO) protocols are “specific practices and procedures to safeguard employees from the unexpected energization or startup of machinery and equipment, or the release of hazardous energy during service or maintenance activities.†In this column, we'll provide a high-level overview of

What is the final step in a lockout?

Shut Down – Power down the machine or equipment. Inform employees that will be affected by the shutdown of the equipment. Isolation – Make sure all sources of energy have been isolated. Turn off power, close valves, block moving parts, or disengage and block lines, etc.

When can tagout be used in place of lockout?

Tagout should only be used with lockout, unless locking out the equipment is impossible. Equipment should be locked out while being repaired.

How do you implement a Loto system?

  1. Step 1: Plan for Success.
  2. Step 2: Understand the Requirements.
  3. Step 3: Create a Company-Specific Program.
  4. Step 4: Secure Commitment from Upper Management.
  5. Step 5: Communicate.
  6. Step 6: Determine What Needs LOTO Control.
  7. Step 7: Create Equipment- and Area-Specific Procedures.
  8. Step 8: Obtain Hardware and Devices.

What do you call the process of putting a tag on defective tool to avoid using it?

Explanation: Lockout–tagout (LOTO) is a safety procedure used in industry and research settings to ensure that dangerous machines are properly shut off and not able to be started up again prior to the completion of maintenance or repair work.

What are the characteristics of a lockout device?

Lockout devices hold energy- isolation devices in a safe or “off†position. They provide protection by preventing machines or equipment from becoming energized because they are positive restraints that no one can remove without a key or other unlocking mechanism, or through extraordinary means, such as bolt cutters.

What is the first step in an energy control procedure?

  1. Prepare for shutdown.
  2. Shut down the machine(s) or equipment.
  3. Disconnect the energy isolating device(s).
  4. Apply the lockout or tagout device(s).
  5. Render all stored and/or residual energy safe.
  6. Verify the isolation and deenergization of the machine or equipment prior to starting work.

How do you make a lockout tagout?

How to Create a Safe Lockout Tagout Program
  1. Create detailed Lockout procedures.
  2. Make procedures easy to access.
  3. Notify affected employees.
  4. Follow the detailed procedure.
  5. Train on the importance of respecting locked and tagged machinery.
  6. Swap correctly during shift changes.
  7. Bring equipment back online.

Why is it important to clear the area of personnel before releasing the lockout tagout?

The work area must first be inspected to ensure that nonessential items (e.g., tools, spare parts) have been removed and that all of the machine or equipment components are operationally intact. The work area must then be checked to ensure all workers have been safety positioned or have cleared the area.

What is another name for lockout tagout?

Control of Hazardous Energy (Lockout/Tagout)

What do you do if an employee is not available to remove the lock?

According to OSHA's lockout/tagout regulation, “When the authorized employee who applied the lockout or tagout device is not available to remove it, that device may be removed under the direction of the employer, provided that specific procedures and training for such removal have been developed, documented, and

Where do tagout devices need to be applied?

Lockout/tagout tags should always be placed with the locks that are used to prevent power from being restored. The locks can come in many different styles including padlocks, pin locks, and many others.

Related Documentation

What is the difference between all purpose flour and pastry flour?

Is there a direct correlation between illiteracy and incarceration?

How many Hispanics are in Canada?

What is the first step in lock out/tag out?